Our service technicians will perform a 60-120 minute Performance and Safety Check including:
- Blow out drain trap
- Carbon Monoxide test
- Check and record compressor volts and amps
- Check and record refrigerant pressures
- Check and record temperature in ducts
- Check filter
- Check humidifier
- Check ignition and flame
- Check pilot and pilot safety control
- Check system for proper drainage
- Check thermostat operation
- Clean burner compartment
- Clean flame sensor
- Clean outdoor coil with a non-acid cleaner
- Infrared inspection of heating system & water heater
- Inspect blower and motor operation
- Inspect electrical wiring
- Inspect indoor coil (if accessible)
- Oil motor and lube as needed
- Test and check limit safety control
- Visually inspect wiring